BELARUS 1221/1221B/1221.2/1221B.2/1221.3/1221B.3/1221.4 |
BELARUS 1222/1222B/1222.2/1222B.2/1222.3/1222B.3/1222.4 |
This range contains models 1221/1221B/1221.2/1221B.2/1221.3/1221B.3/1221.4 and 1222/1222B/1222.2/1222B.2/1222.3/1222B.3/1222.4.
BELARUS 1221.2/1221B.2 - compliance with requirements TIER-1, diesel D-260.2S.BELARUS 1222.2/1222B.2 - compliance with requirements TIER-1, diesel D-260.2S.
BELARUS 1222.3/1222B.3 - compliance with requirements TIER-2, diesel D-260.2S2.
BELARUS 1222.4 - compliance with requirements TIER-3A, diesel DEUTZ TCD 2012 L06-2V.
Tractors BELARUS 1222B/1222B.2/1222B.3 are equipped with reversing control station.
Due to the versatility and basic and additional equipment for building-block design the medium and high capacity BELARUS 1221/1222 tractors may be used in various combinations for the agricultural purposes. The tractors equipped with attached, semi-attached, towed, and semi-towed implements can produce different kinds of operations.
The list of the main branches where the 1000 series tractors are successfully exploited can satisfy any customer.
The modern building-block approach system that includes various hitch and power transfer mechanisms guarantees the operating productive capacity of the tractor. The tractors of this series fulfill more power-consuming operations than those of the previous series.
The rear three-point hitch is of category 2. It allows the attachment of building-block design equipment:
Besides the basic slot used for the attachment with lower control rod, on the hitch bracing there is a groove for the building-block attachment of wide-cut implements, such as cultivators and seeding machines.
All tractors are equipped with hydraulic connection that can be used for the hydrostatic drive of the attached implements.
At the adjustment of the hydraulic ram the tractors are equipped with a lifting mechanism that represents guide plates with slots and provides the adjustment of various towing devices with an optional height alternation.
The lifting mechanism guide plates are designed in accordance with the international standards requirements, which allows the adjustment of certificated towing devices produced by different engineering companies.
The rear and front PTO (optional) supports the mechanical drive for the equipment: planting machines, rotary cultivators, mowing-machines, pumping machines, etc. Some of the equipment can be installed directly on the PTO without any cardan shaft: reduction units, hydraulic pumps.
| Equipment | Potential coverage, m |
|---|---|
| Ploughs | |
| Firm soil | 0.8 |
| Medium soil | 1.4 |
| Loose soil | Up to 1.8 |
| Disk harrows | Up to 6.0 |
| Skim ploughshares | Up to 2.1 |
| Cultivators | 4…8 |
| Seeding machines | Up to 7.2 |
| Reaping-machines | Up to 9 |
| Combines | |
| Ensilage harvester | 1.4 |
| Potato harvester | 1.4 |
While row-crop cultivating the wheels of the tractor can be doubled with the help of a spacer. The wheel doubling with the help of a spacer as well as with the backup wheel hub supports low surface pressure. In its turn, it allows to omit exploiting additional combined implements, which guarantees the increase of the fields' crop capacity and decrease in power inputs.