The agricultural drawbar category 4 caterpillar tractor BELARUS 2102 is equipped with a rubber-reinforced or metal caterpillar track with rubber-metal joint and designed for operating with mounting, semi-mounting, and trailing machinery within the drought resistance range from 30 to 50 kN, including the general purpose operations on the aqueous soil.
The BELARUS 2102 tractor advantageously differs from other analogous series. A front hitch mechanism and a front PTO allow the exploitation of the agricultural machinery that is capable to fulfill several operations at a single operating run. A wider caterpillar track allows to reduce the ground unit pressure. The tractor is equipped with a torsion suspension that has no analogues.
Turbo-supercharging diesel with supercharged air intermediate cooling.
| Model | 260.4 Ñ2 |
| Rated Power, kW (hp) | 154,4 (210) |
| Rated speed, rpm | 2100 |
| Number of cylinders | 6 |
| Engine torque at nominal capacity, N/m (kgf/m) 690,8(70,4) | 690,8(70,4) |
| Maximum engine torque, N/m (kgf/m) | 807,5 (82,34) |
| Fuel consumption rate at service rating, g/kW-h (g/hp-h) | 227 (167) |
| Specific fuel consumption at rated power, g/kWh (g/hph) | 227 |
| Engine torque backup, % (no less) | 15 |
| Fuel tanks capacity, L | 250 |
| Clutch | Dry, double-disk, spring-loaded |
| Gearbox | Manual, synchronized, six-range (4/2) |
| Gear-shift | By synchronized clutches without power flow intermittence |
| Number of gears (front/reverse) | 16/8 |
| Travel speed, km/h (front/reverse) | 2,13-29,8 / 3,2-14,1 |
| Swing-out mechanism | Double-flow, differential type with hydrovolumetric gear |
| Swing-out mechanism control | steering |
| Main gear | Two pairs of bevel gears |
| Final drives | Cylindrical reduction gear |
| Rear PTO, rotation frequency: | |
| Independent I, rpm | 540 |
| Independent II, rpm | 1000 |
| Synchronized rpm of travel | 3,78 |
Rubber-metal joint caterpillar running system. Pin gear type track belt. Supporting mid-rollers torsion suspension (10 mid-rollers and 6 rubber-coated supporting rollers), 4 shock absorbers, drive wheel and idler wheel, and hydraulic tightening device.
Bosch electro-hydraulic system, with automatic depth control, with draft, position and combined control.
| Lift capacity, at 610 mm from lift point, kgf | 5500 | |
| Maximum pressure, mPa | 200 | |
| Number of independent hydraulic outlets | 3 pairs | |
| Pump output, L/min | 60 | |
| Length | 5630 |
| Width, mm | 2085 |
| Height, mm | 2960 |
| Operating weight, kg | 10400 |
| Base, mm | 2300 |
| Tread, mm: | 1600 |
| Ground clearance, mm: | 355 |
| Turning radius, min, m | 2,2 |
| Specific ground pressure, kPa | 50 (0,4) |
| Fordable depth, m | 0,8 |
| Side slope angle, deg | 12 |
| Lifting/lowering angle, deg | |
| Without technological equipment | 30 |
| With technological equipment | 20 |
Service and parking - mechanical, dry, disk-type. Separate pneumatic drive. Trailer brakes drive - pneumatic, locked with tractor brakes control (optional - double-line).
12V single-line system, up to 2000W generator set with 14V output voltage, 24V starting system with 6kW starter, 12V two accumulator batteries.
Safe (ROPS), complies with OECD requirements, with air filtering and heating, with opening side and rear windows and roof hatch, with electric wipers for windscreen and rear window and windscreen washer, with modernized dashboard, with electronic display.